Polycure FT Extra eliminates the need for moist curing of GRC products. Curing of GRC and other cementitious products Cementitious products should be moist cured to ensure that there is sufficient retained moisture for complete hydration of the cement. This is.
When Polycure FT or Polycure FT Extra is added to the mix at the recommended dosage it forms a film within the matrix during the first few hours of curing. The formation of this film significantly reduces the permeability and thus lessens the loss of water by evaporation ensuring that sufficient water is available for complete hydration.
Polycure FT and Polycure FT Extra eliminate the need for moist curing of GRC products. Reduces the quantity of water required. Easy to dose. Can be used with additional plasticisers or super plasticisers. Contains an antifoaming agent. Will free up factory space reserved for curing.
Polycure FT eliminates the need for moist curing of GRC products. Curing of GRC and other cementitious products Cementitious products should be moist cured to ensure that there is sufficient retained moisture for complete hydration of the cement. This is particularly critical for thin skin GRC products.
Product Name: POLYCURE FT EXTRA Product Description: Acrylic Polymer Curing Agent for GRC Supplier: Fibre Technologies International Avonmouth Way, Avonmouth Bristol BS11 9YA T: +44 (0)117 982 5855 F: +44 (0)117 982 0060 E: info@fibretech.org COMPOSITION / INFORMATION ON THE COMPONENTS Hazardous Components in Product: The product does not contain any, Polycure FT – 5KG. £25.86. Reduces the quantity of water required. Easy to dose. Can be used with additional plasticisers or super plasticisers. Contains an antifoaming agent. Will free up factory space reserved for curing.
Polycure FT Extra er en emulsion, der indeholder mindst 50% tørstof, så en doseringsmængde på 5 kg. pr. 50 kg. kan også angives som 5% polymertørstof af cementvægten. Dosering: Polycure FT Extra bør tilsættes blandingen efter at vandet er tilsat, og inden cement og sand. Mængden af vand bør reduceres med mængden af vand i polymeren og, Polycure FT eliminates the need for moist curing of GRC products. Curing of GRC and other cementitious products Cementitious products should be moist cured to ensure that there is sufficient retained moisture for complete hydration of the cement. This is particularly critical for thin skin GRC products.
This plasticiser was named Flowaid SCC and it was used throughout the project. Using this plasticiser, two basic mix designs were developed: one polymer and one non-polymer (Table 1). Material Non-polymer mix Polymer mix Cement 25 25 Silica sand 25 25 Water 9.0 6.75 Polycure FT Extra 0 2.5 Flowaid SCC 0.25 0.25 Table 1.
Acrylic Polymer Curing Agent – Polycure FT & Polycure FT Extra . Add to RFQ. AFT 700-2 Asphalt Pavers. Add to RFQ. AFW 150-2 Asphalt Pavers. Add to RFQ. ALPHA Hoist. Add to RFQ. Angle Broom. Add to RFQ. AP 240 – Pneumatic Tyred Rollers. Add to …
